Custom Clutch Vacuum Pipe A

by Jeff Lucius

I never cared for the clutch vacuum pipe that is routed high in the engine bay near battery and Y-pipe. So I fabricated a new one out of 3/8" copper tube. Another option would be to replace Pipe A and the hose connections at each end with a single piece of 10-mm ID silicone hose.

Copper tube bending tools

Comparison of clutch pipes

Custom clutch vacuum pipe A

Back Home Forward

Except for the small gif and jpg images, the content, images, photographs, text, and multimedia displayed are Copyright ©2000-2002 by Jeff Lucius and K2 Software. All rights reserved. No part, section, image, photo, article, or whole of this site may be reposted or redisplayed without permission of the author.
Page last updated March 17, 2002.